ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: etc

## This is a system-wide configuration file for the nano editor.
##
## Each user can save his own configuration to ~/.nanorc
##
## See the nanorc(5) man page for details.

## Sample initialization file for GNU nano.
##
## For the options that take parameters, the default value is shown.
## Other options are unset by default.  To make sure that an option
## is disabled, you can use "unset <option>".
##
## Characters that are special in a shell should not be escaped here.
## Inside string parameters, quotes should not be escaped -- the last
## double quote on the line will be seen as the closing quote.

## Make 'nextword' (Ctrl+Right) and 'chopwordright' (Ctrl+Delete)
## stop at word ends instead of at beginnings.
# set afterends

## When soft line wrapping is enabled, make it wrap lines at blanks
## (tabs and spaces) instead of always at the edge of the screen.
# set atblanks

## Automatically indent a newly created line to the same number of
## tabs and/or spaces as the preceding line -- or as the next line
## if the preceding line is the beginning of a paragraph.
# set autoindent

## Back up files to the current filename plus a tilde.
# set backup

## The directory to put unique backup files in.
# set backupdir ""

## Use bold text instead of reverse video text.
# set boldtext

## Treat any line with leading whitespace as the beginning of a paragraph.
# set bookstyle

## The characters treated as closing brackets when justifying paragraphs.
## This may not include any blank characters.  Only closing punctuation,
## optionally followed by these closing brackets, can end sentences.
# set brackets ""')>]}"

## Automatically hard-wrap the current line when it becomes overlong.
# set breaklonglines

## Do case-sensitive searches by default.
# set casesensitive

## Constantly display the cursor position in the status bar or minibar.
# set constantshow

## Use cut-from-cursor-to-end-of-line by default.
# set cutfromcursor

## Do not use the line below the title bar, leaving it entirely blank.
# set emptyline

## Set the target width for automatic hard-wrapping and for justifying
## paragraphs.  If the specified value is 0 or less, the wrapping point
## will be the terminal's width minus this number.
# set fill -8

## Remember the used search/replace strings for the next session.
# set historylog

## Display a "scrollbar" on the righthand side of the edit window.
# set indicator

## Scroll the buffer contents per half-screen instead of per line.
# set jumpyscrolling

## Display line numbers to the left (and any anchors in the margin).
# set linenumbers

## Enable vim-style lock-files.  This is just to let a vim user know you
## are editing a file [s]he is trying to edit and vice versa.  There are
## no plans to implement vim-style undo state in these files.
# set locking

## Fall back to slow libmagic to try and determine an applicable syntax.
# set magic

## The opening and closing brackets that can be found by bracket
## searches.  They cannot contain blank characters.  The former set must
## come before the latter set, and both must be in the same order.
# set matchbrackets "(<[{)>]}"

## Suppress title bar and show file name and editor state at the bottom.
# set minibar

## Enable mouse support, if available for your system.  When enabled,
## mouse clicks can be used to place the cursor, set the mark (with a
## double click), and execute shortcuts.  The mouse will work in the X
## Window System, and on the console when gpm is running.
# set mouse

## Switch on multiple file buffers (inserting a file will put it into
## a separate buffer).
# set multibuffer

## Don't convert files from DOS/Mac format.
# set noconvert

## Don't display the helpful shortcut lists at the bottom of the screen.
# set nohelp

## Don't automatically add a newline when a file does not end with one.
# set nonewlines

## Set operating directory.  nano will not read or write files outside
## this directory and its subdirectories.  Also, the current directory
## is changed to here, so any files are inserted from this dir.  A blank
## string means the operating-directory feature is turned off.
# set operatingdir ""

## Remember the cursor position in each file for the next editing session.
# set positionlog

## Preserve the XON and XOFF keys (^Q and ^S).
# set preserve

## The characters treated as closing punctuation when justifying
## paragraphs.  They cannot contain blank characters.  Only closing
## punctuation, optionally followed by closing brackets, can end
## sentences.
# set punct "!.?"

## Make status-bar messages disappear after 1 keystroke instead of after 20.
# set quickblank

## The regular expression that matches quoting characters in email
## or line-comment introducers in source code.  The default is:
# set quotestr "^([ 	]*([!#%:;>|}]|//))+"

## Try to work around a mismatching terminfo terminal description.
# set rawsequences

## Fix Backspace/Delete confusion problem.
# set rebinddelete

## Do regular-expression searches by default.
## Regular expressions are of the extended type (ERE).
# set regexp

## Save a changed buffer automatically on exit; don't prompt.
# set saveonexit
## (The old form of this option, 'set tempfile', is deprecated.)

## Put the cursor on the highlighted item in the file browser, and show
## the cursor in the help viewer; useful for people who use a braille
## display and people with poor vision.
# set showcursor

## Make the Home key smarter.  When Home is pressed anywhere but at the
## very beginning of non-whitespace characters on a line, the cursor
## will jump to that beginning (either forwards or backwards).  If the
## cursor is already at that position, it will jump to the true
## beginning of the line.
# set smarthome

## Spread overlong lines over multiple screen lines.
# set softwrap

## Use this spelling checker instead of the internal one.  This option
## does not have a default value.
set speller "hunspell"

## Use the end of the title bar for some state flags: I = auto-indenting,
## M = mark, L = hard-wrapping long lines, R = recording, S = soft-wrapping.
# set stateflags

## Allow nano to be suspended (with ^Z by default).
# set suspendable
## (The old form of this option, 'set suspend', is deprecated.)

## Use this tab size instead of the default; it must be greater than 0.
# set tabsize 8

## Convert typed tabs to spaces.
# set tabstospaces

## Snip whitespace at the end of lines when justifying or hard-wrapping.
# set trimblanks

## The two single-column characters used to display the first characters
## of tabs and spaces.  187 in ISO 8859-1 (0000BB in Unicode) and 183 in
## ISO-8859-1 (0000B7 in Unicode) seem to be good values for these.
## The default when in a UTF-8 locale:
# set whitespace "»·"
## The default otherwise:
# set whitespace ">."

## Detect word boundaries differently by treating punctuation
## characters as parts of words.
# set wordbounds

## The characters (besides alphanumeric ones) that should be considered
## as parts of words.  This option does not have a default value.  When
## set, it overrides option 'set wordbounds'.
# set wordchars "<_>."

## Let an unmodified Backspace or Delete erase the marked region (instead
## of a single character, and without affecting the cutbuffer).
# set zap

## Paint the interface elements of nano.  These are examples; there are
## no colors by default, except for errorcolor and spotlightcolor.
# set titlecolor bold,lightwhite,blue
# set promptcolor lightwhite,lightblack
# set statuscolor bold,lightwhite,green
# set errorcolor bold,lightwhite,red
# set spotlightcolor black,lime
# set selectedcolor lightwhite,magenta
# set stripecolor ,yellow
# set scrollercolor cyan
# set numbercolor cyan
# set keycolor cyan
# set functioncolor green

## In root's .nanorc you might want to use:
# set titlecolor bold,lightwhite,magenta
# set promptcolor black,yellow
# set statuscolor bold,lightwhite,magenta
# set errorcolor bold,lightwhite,red
# set spotlightcolor black,orange
# set selectedcolor lightwhite,cyan
# set stripecolor ,yellow
# set scrollercolor magenta
# set numbercolor magenta
# set keycolor lightmagenta
# set functioncolor magenta

## === Syntax coloring ===
## For all details, see 'man nanorc', section SYNTAX HIGHLIGHTING.

## To include most of the existing syntax definitions, you can do:
include "/usr/share/nano/*.nanorc"

## Or you can select just the ones you need.  For example:
# include "/usr/share/nano/html.nanorc"
# include "/usr/share/nano/python.nanorc"
# include "/usr/share/nano/sh.nanorc"

## In /usr/share/nano/extra/ you can find some syntaxes that are
## specific for certain distros or for some less common languages.

## If <Tab> should always produce four spaces when editing a Python file,
## independent of the settings of 'tabsize' and 'tabstospaces':
# extendsyntax python tabgives "    "

## If <Tab> should always produce an actual TAB when editing a Makefile:
# extendsyntax makefile tabgives "	"

## === Key bindings ===
## For all details, see 'man nanorc', section REBINDING KEYS.

## The <Ctrl+Delete> keystroke deletes the word to the right of the cursor.
## On some terminals the <Ctrl+Backspace> keystroke produces ^H, which is
## the ASCII character for backspace, so it is bound by default to the
## backspace function.  The <Backspace> key itself produces a different
## keycode, which is hard-bound to the backspace function.  So, if you
## normally use <Backspace> for backspacing and not ^H, you can make
## <Ctrl+Backspace> delete the word to the left of the cursor with:
# bind ^H chopwordleft main

## If you would like nano to have keybindings that are more "usual",
## such as ^O for Open, ^F for Find, ^H for Help, and ^Q for Quit,
## then uncomment these:
#bind ^Q exit all
#bind ^S savefile main
#bind ^W writeout main
#bind ^O insert main
#bind ^H help all
#bind ^H exit help
#bind ^F whereis all
#bind ^G findnext all
#bind ^B wherewas all
#bind ^D findprevious all
#bind ^R replace main
#bind M-X flipnewbuffer all
#bind ^X cut all
#bind ^C copy main
#bind ^V paste all
#bind ^P location main
#bind ^A mark main
#unbind ^K main
#unbind ^U all
#unbind ^N main
#unbind ^Y all
#unbind M-J main
#unbind M-T main
#bind ^T gotoline main
#bind ^T gotodir browser
#bind ^Y speller main
#bind M-U undo main
#bind M-R redo main
#bind ^U undo main
#bind ^E redo main
#set multibuffer

[+] ..
[+] lvm
[+] dracut.conf.d
[-] sudoers [edit]
[-] ips.remotedns [edit]
[-] freetds.conf [edit]
[-] chrony.keys [edit]
[+] tmpfiles.d
[-] nfsmount.conf [edit]
[+] kdump
[-] DIR_COLORS [edit]
[-] .updated [edit]
[-] localtime [edit]
[-] exim.conf.dist [edit]
[-] group- [edit]
[-] profile [edit]
[-] dracut.conf [edit]
[+] audit
[-] mailips [edit]
[+] alsa
[+] wireplumber
[-] ipaddrpool [edit]
[-] printcap [edit]
[-] issue [edit]
[-] exim.pl [edit]
[+] rc.d
[+] terminfo
[+] samba
[+] debuginfod
[-] userdomains [edit]
[+] libssh
[-] rsyslog.conf [edit]
[+] rc6.d
[-] cpupdate.conf [edit]
[-] trueuserowners [edit]
[-] sudo-ldap.conf [edit]
[-] shells [edit]
[+] microcode_ctl
[-] exim.crt [edit]
[+] flatpak
[-] stats.conf [edit]
[+] imunify-agent-proxy
[+] pki
[+] sgml
[+] nginx
[+] rc1.d
[-] inittab [edit]
[-] cpsources.conf.plugins.example [edit]
[-] nanorc [edit]
[-] recent_recipient_mail_server_ips [edit]
[-] magic [edit]
[+] scl
[+] yum.repos.d
[-] subuid [edit]
[+] pure-ftpd
[-] relayhostsusers [edit]
[-] pure-ftpd.conf [edit]
[-] named.conf.precpanelinstall [edit]
[+] krb5.conf.d
[-] wwwacct.conf.shadow.cache [edit]
[+] modprobe.d
[-] hostname [edit]
[-] wgetrc [edit]
[-] idmapd.conf [edit]
[-] trusted_mail_users [edit]
[+] rc5.d
[-] blocked_incoming_email_country_ips [edit]
[-] senderverifybypasshosts [edit]
[-] outgoing_mail_hold_users [edit]
[-] environment [edit]
[+] libibverbs.d
[-] libaudit.conf [edit]
[-] rpc [edit]
[-] relayhosts [edit]
[-] my.cnf [edit]
[-] subgid [edit]
[-] manualmx [edit]
[+] proftpd
[-] sestatus.conf [edit]
[-] trustedmailhosts [edit]
[+] modulefiles
[+] depmod.d
[-] request-key.conf [edit]
[+] yum
[-] nocgiusers [edit]
[-] ld.so.conf [edit]
[-] shadow [edit]
[+] alternatives
[+] vfilters
[+] gss
[+] request-key.d
[+] rc4.d
[-] networks [edit]
[+] authselect
[-] localaliases [edit]
[-] ftpd-ca.pem [edit]
[+] sysctl.d
[+] dovecot
[+] chkserv.d
[+] gnupg
[-] userips [edit]
[+] skel
[-] favicon.png [edit]
[+] pam.d
[-] .whostmgrft [edit]
[-] spammeripblocks [edit]
[-] named.conf.cache [edit]
[+] cl.selector
[+] xml
[+] plymouth
[+] ld.so.conf.d
[-] nsswitch.conf.bak [edit]
[+] crypto-policies
[-] eximrejects.rpmorig [edit]
[-] webspam [edit]
[-] localdomains.rpmnew [edit]
[+] imunify360-webshield
[-] mailbox_formats [edit]
[-] pinforc [edit]
[-] fprintd.conf [edit]
[-] antivirus.exim [edit]
[+] rsyslog.d
[-] localdomains [edit]
[+] vdomainaliases
[-] digestshadow [edit]
[+] sos
[-] grub2.cfg [edit]
[-] chrony.conf [edit]
[-] named.conf.prerebuilddnsconfig [edit]
[-] resolv.conf [edit]
[+] NetworkManager
[-] named.conf.rebuilddnsconfig [edit]
[-] updatedb.conf [edit]
[+] libnl
[-] system-release-cpe [edit]
[-] wwwacct.conf [edit]
[+] imunify360-wafd
[-] skipsmtpcheckhosts [edit]
[+] bluetooth
[+] mail
[-] exim.pl.local [edit]
[-] exports [edit]
[-] locales.conf [edit]
[-] DIR_COLORS.lightbgcolor [edit]
[+] ImageMagick-6
[-] named.root.key [edit]
[+] sw-engine
[+] udev
[-] odbcinst.ini [edit]
[-] exim.conf.mailman2.exiscan.dist [edit]
[-] dbowners [edit]
[-] trueuserdomains [edit]
[-] libuser.conf [edit]
[-] .pwd.lock [edit]
[-] demousers [edit]
[+] polkit-1
[+] dconf
[+] groff
[-] passwd.cache [edit]
[-] group [edit]
[+] exports.d
[-] cron.deny [edit]
[+] iproute2
[+] popt.d
[+] sasl2
[-] s-nail.rc [edit]
[-] mailhelo [edit]
[+] nftables
[+] gssproxy
[-] cpanel_mail_netblocks [edit]
[-] logrotate.conf [edit]
[-] eximrejects [edit]
[-] filesystems [edit]
[+] my.cnf.d
[-] demouids [edit]
[-] ips.dnsmaster [edit]
[-] blocked_incoming_email_domains [edit]
[-] rsyncd.conf [edit]
[-] virc [edit]
[-] exim_suspended_list [edit]
[-] backupmxhosts [edit]
[+] keyutils
[-] sudo.conf [edit]
[-] mailcap [edit]
[-] shadow.nouids.cache [edit]
[+] profile.d
[-] agent360.ini [edit]
[+] firewalld
[-] system-release [edit]
[+] openldap
[-] exim.conf.local [edit]
[+] apache2
[-] bashrc [edit]
[-] demodomains [edit]
[+] cifs-utils
[+] rc0.d
[-] csh.login [edit]
[-] named.conf.zonedir.cache [edit]
[-] cpbackup-exclude.conf [edit]
[-] papersize [edit]
[-] neighbor_netblocks [edit]
[+] dpkg
[+] pkcs11
[+] security
[-] gshadow- [edit]
[-] named.conf [edit]
[-] named.rfc1912.zones [edit]
[-] nsswitch.conf [edit]
[-] exim_trusted_configs [edit]
[+] dhcp
[-] remotedomains [edit]
[+] default
[+] X11
[-] pcp.conf [edit]
[+] logrotate.d
[+] dbus-1
[-] subuid- [edit]
[-] ssldomains [edit]
[-] yum.conf [edit]
[-] aliases [edit]
[+] csf
[+] smartmontools
[-] pool.conf [edit]
[-] ips [edit]
[-] bindresvport.blacklist [edit]
[+] modules-load.d
[-] hosts [edit]
[+] pulse
[+] sssd
[+] tpm2-tss
[-] recent_authed_mail_ips_users [edit]
[-] fuse.conf [edit]
[-] mime.types [edit]
[-] cpanel_exim_system_filter [edit]
[-] domain_remote_mx_ips.cdb [edit]
[-] sysctl.conf [edit]
[-] recent_authed_mail_ips [edit]
[-] ftpd-rsa.pem [edit]
[-] inputrc [edit]
[+] cagefs
[+] dnf
[+] nvme
[+] cron.d
[+] glvnd
[-] csh.cshrc [edit]
[-] blocked_incoming_email_countries [edit]
[-] userbwlimits [edit]
[-] nfs.conf [edit]
[+] pcp
[-] crontab [edit]
[-] spammers [edit]
[-] elinks.conf [edit]
[-] odbc.ini [edit]
[+] bash_completion.d
[+] libpaper.d
[-] wwwacct.conf.cache [edit]
[-] wwwacct.conf.shadow [edit]
[+] grub.d
[-] ips.remotemail [edit]
[-] passwd- [edit]
[-] xattr.conf [edit]
[+] cron.hourly
[-] makedumpfile.conf.sample [edit]
[+] gcrypt
[-] krb5.conf [edit]
[-] pure-ftpd.pem [edit]
[+] valiases
[+] cron.monthly
[+] sudoers.d
[-] crypttab [edit]
[-] GREP_COLORS [edit]
[-] nscd.conf [edit]
[+] cron.weekly
[-] anacrontab [edit]
[+] pm
[+] chkconfig.d
[-] greylist_common_mail_providers [edit]
[-] lock_manager_local.ini [edit]
[+] pkgconfig
[+] systemd
[+] ostree
[+] keys
[+] libreport
[-] issue.net [edit]
[+] statetab.d
[-] cpspamd.conf [edit]
[+] pdns
[-] subgid- [edit]
[-] mtab [edit]
[-] passwd.nouids.cache [edit]
[-] machine-id [edit]
[-] greylist_trusted_netblocks [edit]
[+] sysconfig
[+] tuned
[+] issue.d
[-] asound.conf [edit]
[-] domainusers [edit]
[+] rpm
[+] rwtab.d
[-] locale.conf [edit]
[+] egl
[-] exim.conf.localopts [edit]
[+] environment-modules
[+] init.d
[-] shadow- [edit]
[-] ethertypes [edit]
[+] motd.d
[-] almalinux-release [edit]
[-] userdatadomains.json [edit]
[-] email_send_limits [edit]
[+] iscsi
[-] services [edit]
[-] login.defs [edit]
[-] eximmailtrap [edit]
[+] fonts
[-] man_db.conf [edit]
[-] host.conf [edit]
[-] ftpd-rsa-key.pem [edit]
[+] UPower
[-] passwd [edit]
[-] trusted-key.key [edit]
[-] ld.so.cache [edit]
[-] domainips [edit]
[+] multipath
[-] mdadm.conf [edit]
[-] outgoing_mail_suspended_users [edit]
[+] named
[-] userdatadomains [edit]
[+] mcelog
[-] exim.conf.mailman2.dist [edit]
[+] cron.daily
[+] ssl
[+] rc3.d
[+] cpanel
[-] redhat-release [edit]
[-] netconfig [edit]
[-] secondarymx [edit]
[+] opt
[+] geoclue
[+] selinux
[+] lsm
[+] rc2.d
[+] binfmt.d
[-] exim.key [edit]
[+] imunify360
[-] rc.local [edit]
[+] kernel
[-] vconsole.conf [edit]
[+] ssh
[-] userplans [edit]
[-] kdump.conf [edit]
[-] mke2fs.conf [edit]
[-] at.deny [edit]
[-] exim.conf [edit]
[+] xdg
[-] adjtime [edit]
[-] fstab [edit]
[-] motd [edit]
[-] exim.conf.localopts.shadow [edit]
[-] os-release [edit]
[-] gshadow [edit]
[-] vimrc [edit]
[-] protocols [edit]